About complex products, customs and solutions
We have compiled frequently asked questions from our customers and their answers.
Please use this if you cannot find the information you are looking for or need more detailed information.
Product Category
-
＊Search example : Stator Ass'y, Rated Torque
Precision Machined Components
Fastener
QCan you make products in the shape of our request?
A Please contact your sales representative or submit your query via our Contact form.
Rotary Components
Hybrid stepping motors
QMotor vibration and noise become severe at specific speed ranges. What is the cause?
A
This is likely due to the "resonance" phenomenon characteristic of stepping motors. You need to either avoid these speed ranges or change the driving method.
Resonance occurs when the natural frequency of the motor matches the input pulse frequency. Countermeasures include programming to quickly bypass the resonant speed band or changing to a driver with a "microstepping" feature, which finely divides pulses for smoother rotation.
PM stepping motors
QI want to run a PM stepping motor at maximum speed, but the torque drops abruptly and it stops. What is the cause?
A
This sudden torque drop-off is a fundamental physical limitation caused by back electromotive force (back EMF) and coil inductance, which restrict current flow at higher speeds.
As the motor’s speed increases, the motor acts like a generator, producing a reverse voltage. Overcoming this back EMF to drive current requires a higher driver power supply voltage.
Vacuum Pump (under development)
QWhat causes increased noise and vibration during pump operation?
A
The primary causes are typically bearing wear due to aging or the end of the diaphragm
lifecycle. Replacing the cartridge pump unit is recommended.
Although our product features a long-life design, exceeding the specified service life can
lead to increased noise and vibration.
QIs it necessary to install an air filter on the suction side?
A
If the workpiece may carry dust or debris, installing an air filter is strongly recommended
to protect the pump and preserve performance.
Debris trapped in the diaphragm or valves reduces vacuum pressure and causes insufficient
flow. Installing a compact inline filter between the suction pad and the pump can
significantly reduce failure rates.
QIs it possible to customize the pump to achieve our required flow rate and vacuum pressure?
A
Customization beyond standard catalog specifications is available, subject to minimum order quantities (MOQs).
We can propose optimizations tailored to your application, such as adjusting motor speed by changing the windings or
modifying materials based on your operating environment. Please contact us with your detailed requirements.
Fan Motors
High-pressure blowers
QAre blowers repairable?
A No, we do not repair blowers
We sell blowers for maintenance purposes.
Sensing Devices
Strain gage
QDo you offer custom strain gauges with non-standard shapes or specifications?
A
Contact Us
Please click the inquiry type below according to your question. Each product / sales representative will respond to you.
