Wavy Nozzle

What is a Wavy Nozzle

The Wavy Nozzle gives you the ability to distribute coolant oil or air from the nozzle system in a fixed or reciprocating motion for productivity improvement of the cutting process.

Wavy Nozzle Benefits

The benefit of removing chips
- Decreases damage to the product
- Increases processing precision
- Prevents breakage of cutting tools
- Decreases machine down time
- Promotes continuous automatic operation of the machine
Coolant oil is consistently directed to each tool correctly.
Chips will not accumulate on the processing table.

Operation Mode

FIX Mode
Nozzle is fixed at adjustable angles.
SWEEP Mode
Nozzle sweeps in a uniformed motion from a programmed range of motion.
KICK Mode
Nozzle "kicks" in a rapid acceleration from a programmed range of motion.

Using a dedicated controller, the operation mode, angle and speed can be programmed into Wavy Nozzle's memory. (Teaching Playback)
Operators can call up the desired mode.
Operators can apply suitable Wavy Nozzle modes to each cutting tool.

e.g.) MM01 (Memory No.01) : Mode SWEEP, Angle 05~10, Speed 50
MM02 (Memory No.02) : Mode KICK, Angle 06~10, Speed 10

Wired and Wireless Controller

Controller (Wired)*1

*1 Wired controller sold separately.

Controller (Wireless)*2

*2 Wireless model is controlled via a dedicated iOS app (iOS device is not included)

Simple Machine Monitoring System

The Wavy Nozzle iOS app can monitor machine conditions in real-time. Up to 50 machines can be registered.

Important point about wireless models
The wireless model can only be used in countries where this unit is wirelessly approved.

The wireless model option is currently available in the following countries:
Japan, United States of America, Canada, Europe (CE marking applied country), Thailand

Product Specifications

* Please refer to the attached file

Wavy Nozzle specifications details

Basic Line-ups

Model	Controller	Ejection Unit	Nozzle Cable	Motor Driver	Control Board	Wireless Module	Controller Relay Cable
WN-11H	Wired	1	1	1	1	-	1
WN-11R	Wireless	1	1	1	1	1	-
WN-12H	Wired	2	2	2	1	-	1
WN-12R	Wireless	2	2	2	1	1	-

"Wavy Nozzle" is registered trademark of MinebeaMitsumi Inc.
Japan registered trademark : No. 5645210
"FANUC" and "ROBODRILL" are trademarks or registered trademarks of FANUC Corporation
iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.

Engineering Information

Technical Data

Usage

Installed machine example videos

Machinery type	Machine manufacturer	Model	Injection point	Injection video
Machining center	FANUC	ROBODRILL	Main spindle	VIDEO 1
Machining center	DMG MORI	NVX5100	Main spindle	VIDEO 2
Auto-lathe	TSUGAMI	B0205-	Back operation tool	VIDEO 3
	CITIZEN MACHINERY	L20	Main spindle	VIDEO 4
	CITIZEN MACHINERY	M32	Main spindle(Air injection)	VIDEO 5

Comparison videos with and without Wavy Nozzle

Machinery type	Machine manufacturer	Model	Comparison	Operation video
Machining center	FANUC	ROBODRILL	Chip residue on workpiece	VIDEO 6
Auto-lathe	CITIZEN MACHINERY	M20	Chip winding around the tool	VIDEO 7
Auto-lathe	CITIZEN MACHINERY	M32	Chip winding around the tool	VIDEO 8

Installation effect data

Effect	Material	TARGET	Effect detail	Document
Yield improvement	SUS303	GROOVE	Chip remaining on workpiece	Result 1
	SUS303	OUTER DIAMETER ・ V-GROOVE	Dent on the workpiece	Result 2
	SUS316	OUTER DIAMETER	Dent on the workpiece	Result 3
	SUS416	OUTER DIAMETER	Dent on the workpiece	Result 4
	SUS303	OUTER DIAMETER	Dent on the workpiece	Result 5
	SUS303	OUTER DIAMETER	Dent on the workpiece	Result 6
	SUS303	OUTER DIAMETER	Dent on the workpiece	Result 7
Tool cost reduction	S50C	END MILL	Tool life	Result 8
	SS400	TAP	Tool life	Result 9
	SS400	DRILL	Tool life and Surface quality	Result 10
Productivity improvement	SS400	END MILL	Cleaning	Result 11
Productivity improvement	SUS303	OUTER DIAMETER	Reduction of chip removal work	Result 12

Installation

All Engineering Information