Digital Indicator
Graphic Digital Indicator CSD-912B-EX
Features
・ 6.2 inches TFT color liquid crystal touch panel display with excellent visibility color and wide viewing angle is adopted.
・ Waveform display of weighing status is available.
・ 100 kinds of brands and recipes can be stored in the internal memory.
・ High speed A/D conversion at 1 000 times/second.
・ RS-485 interface and the serial interface are equipped as an standard.
・ Wide range of power supply voltage (AC100 V ~ AC240 V)
・ Protection grade : IP65
・ CE Mark Mark applied.
Specification
| Specification name | Specification contents |
|---|---|
| Bridge power supply | 12 VDC±0.3VDC within 140 mA (Changeable to 3 VDC or 6 VDC) with remote sensing function |
| Input sensitivity | 0.3 μV/d or more (d = minimum scale) |
| Input range | -3.1 mV/V ~ 3.1 mV/V |
| Zero adjustment range | -2.5 mV/V ~ 2.5 mV/V |
| Non-linearity | 0.01 %F.S. |
| Temperature coefficient | Zero point ±0.1 μV/℃,Sensitivity ±0.000 8 %F.S./℃ (When the calibration is set at 0.3 μV/d or more for input sensitivity.) |
| Noise in input signal | ±0.2 μVP-P or less (At the default setting for analog filter, digital filter, stabilization filter and A/D sampling.) |
| Analog filter | Approx. 4 Hz (Changeable to 2 Hz, 6 Hz, 8 Hz, 10 Hz or 100 Hz) |
| A/D sampling speed | 200 times/s (Changeable to 1 000 times/s, 100 times/s, 50 times/s, 20 times/s or 10 times/s.) |
| A/D internal resolution | 24 bit |
| Display unit | Wide viewing angle 6.2 inches TFT color liquid crystal display], Numbers of dots : 640 x 240 dots, Dot pitch : 0.077 mm x 0.231 mm |
| Back light | Brightness : Approx. 240 cd/m2 (typ.), Durability : Approx.40 000 hour (typ.) at 25 ℃ until the surface brightness reaches 50 % of initial. |
| Display range | - 999 999 ~ 999 999 |
| Status display | GROSS / NET, TARE, PRE.TARE, STABLE, HOLD, Z-ERR, RUN, CZ, F.FLOW/S1, M.FLOW/S2, D.FLOW/S3, OVER/S4, OK, UNDER, FULL, Z-BAND, FINISH, FLOW / DISCH., S-COMP / SEQ. / 4-COMP / MEAS. / OUT / MIX |
| Dsiplay of setting value | Final, Preliminary-1, Preliminary-2, Over, Under, Free fall |
| Display of brand | Code No.: 0 ~ 99, Brand name: Up to 15 characters |
| Display times | 4 times/s (Changeable to 20 times/s) |
| Display of decimal point | Changeable to no display, 10¹, 10², 10³, 10⁴. |
| Unit display | Changeable to no display, g, kg, t, lb, N and kN |
| Accumulation display | Accumulation value: 0 ~ 9 999 999 999, Accumulation times: 0 ~ 999 999 |
| Setting method of operation | Setting by the operation in Analog resistive touch panel, Also, setting can be made by the communication through RS-485 interface. |
| Various function | |
| Zero tracking | Stabilize the zero shift in a constant condition. |
| Digital filter | Stabilize the data by operating process in CPU. |
| Stabilization filter | Stabilize by strengthened the digital filter only when the change width of theload is constant. |
| Calibration LOCK switch | Lock the calibration function by this switch. |
| Digital linearize | Compensate the non-linearity by 3 points at the maximum. |
| Accumulating function | Accumulate the loading data, and memorize the times and total value. |
| Preset tare | Execute the tare weight cancellation by the setting value input in digital. |
| Operating temp. /humidity range |
Temperature 0 ℃~ 40 ℃, Humidity 85 % or less (Non condensing) |
| Power supply voltage | 100 VAC ~ AC240 VAC (Permitted variable range: 85 VAC ~264 VAC) 50/60 Hz |
| Power consumption | Approx. 20 VA (without any options, at 100 VAC), Approx. 30 VA or less (with options, at 100 VAC) |
| Outline dimensions (WxHxD) |
192 mm x 96 mm x 132mm (excludes protruding parts) |
| Weight | Approx. 1.6 kg (without options) |
| Protection code | IP65 or equivalent (Only for the fron panel when the attached panel mounting gascket is installed.) |
Download
Instruction Manual
Specification
CAD
Options
- Current output
- Voltage output
- BCD output
- RS-232C interface
- RS-422/RS-485 interface
- CC-Link interface
- PROFIBUS interface
