Force Sensor
FSU series
Features
Aluminum alloy. Roverbal type and full bridge type
Rated capacity : 4.903 N {0.5 kgf}~147.1 N {15 kgf}
Specification
| Specification name | Specification contents |
|---|---|
| Rated capacity | 4.903 N{0.5 kgf}～147.1 N{15 kgf} |
| Safe overload | 450 %R.C. |
| Ultimate overload | 600 %R.C. |
| Rated output | 0.5 mV/V±0.05 mV/V(FSU-0.5K: 0.5 mV/V±0.075 mV/V) |
| Non-linearity | 0.1 %R.O. |
| Hysteresis | 0.1 %R.O. |
| Repeatability | 0.1 %R.O. |
| Creep | 0.15 %R.O./1 min |
| Creep recovery | 0.15 %R.O./1 min |
| Excitation, recommended | 10 V or less |
| Excitation, maximum | 15 V |
| Zero balance | ±0.4 mV/V |
| Input resistance | 340 Ω±50 Ω |
| Output resistance | 340 Ω±50 Ω |
| Insulation resistance | 1,000 MΩ or more (DC50 V) (between bridge and main body) |
| Temp. range, compensated | 0 ℃～60 ℃ |
| Temp. range, safe | －10 ℃～80 ℃ |
| Temp. effect on zero | ±1 %R.O./10 ℃ |
| Temp. effect on output | ±1 %LOAD/10 ℃ |
| Lead wire | AWG30, 150 mm directly attached, cable end is separated |
| Class of protection | IP00 or equivalent |
| Material of element | Alluminium alloy |
| Durability | 1,000,000 times with rated load applied. |
| Effect of eccentric load | ・The center of loading plate and also the center of load cell should be the same position. ・Error is within 0.8 %R.O. applied with 1/2 of rated capacity at the position of 50 mm of eccentricity. |
Table of P/N
| Parts No. | Rated capacity [N] |
Rated capacity [kgf] |
Weight(Approx. ) [g] |
Cable | Cable2 | Cable3 | 3D CAD files [STEP] | CAD files[DXF] |
|---|
