Move to the body of this page
Compression type for industrial weighing systems

Double convex type load cell DC002 series with digital output


The built-in amplifier with excellent noise-proof enables high precision measurement.
Approved OIML R60 Class C6.


Specification name Specification contents
OIML accuracy class OIML R60 C6
Maximum scale interval 6,000
Rated capacity 10t~40t
Minimum detected scale (Vmin) 0.625kg~2.5kg
Safe overload 150 %R.C.
Ultimated overload 200 %R.C.
Rated output 1 000 000 count±500 count
Non-linearity 0.012 %R.O.
Hysteresis 0.012 %R.O.
Repeatability 0.010 %R.O.
Creep 0.008 %R.O./30 min
Zero return 0.008 %R.O./30 min
Power supply voltage DC7.5 V ~ DC15 V
Power consumption DC35 mA (at DC12 V of power supply)
Zero balance ±10,000 count
Insulated resistance 100 MΩor more (DC50 V)
Temp. range, compensated -10 ℃~40 ℃
Temp. range, safe -20 ℃~70 ℃
Temp. effect on zero balance 0.014 %R.O./10 ℃
Temp. effect on output 0.010 %LOAD/10 ℃
Degital output
Signal Differential signal (Conforming to RS-485)
Data output frequency 160 times/s at maximum
Baud rate 57 600 bps
Data bit length 7 bit
Parity bit Odd
Stop bit 1 bit
Terminator CR
Transmission method Half duplex
Synchronous method Start-stop synchronization
Address 0 ~ 9
No. of Connectable unit Up to 8 units
Transmission data ASCII Code
Standard function Digital filter, Stabilization filter, A/Z, A/Z OFF
Protection class IP68 or equivalent
Material of element Alloy steel
Material of cover Stainless steel (lost wax)
Durability 1,000,000 times with rated load applied.
Allowable horizontal moving length 10 mm (Please set the stopper of truck scale within 5 mm.)Recomended movable range is 2 mm ~ 3 mm.
Accessories Guide ring, Inspection data sheet

Table of P/N

Parts No. Rated capacity
Natural frequency
Rated displacement
Weight(Approx. )
Cable 3D CAD files [STEP] CAD files[DXF] Specification sheet Instruction Manual


Page Top