F220C Series

Maintenance Products

Introducing motorized impellers developed mainly for telecommnication equipment.
Using MinebeaMitsumi made ball bearings and retaining high reliability with three phase driving system DC brushless motor.
These motors are used for the parts and components where a stronger airflow and static pressure are required.
Environment-compatible type products such as dustproof, waterproof, and so on are also being provided.

General Specifications

Motor Protection:Locked rotor, Reverse polarity
Insulation Resistance:10M Ohm min, measured with 500V DC between all leads shorted together and case
Dielectric Withstand Voltage:AC500V 1minute
Allowable Ambient Temperature Range:
-30 deg.C - +70 deg.C (Operating)
-40 deg.C - +80 deg.C (Storage)
non-condensing environment

Click the arrow icon in the table below to switch from ascending to descending order.

scroll

Model	Nominal Voltage [V]	Operating Voltage lower limit [V]	Operating Voltage upper limit [V]	Nominal Current [A]	Input Power [W]	Speed [rpm]	Maximum airflow [m3/min]	Max. Air Flow [CFM]	Max. Static Pressure [Pa]	Max. Static Pressure [In H2O]	Noise [dB]	Mass [g]
F220C1-063-D0720	48	36	72	1.0	48.0	2700	14.0	497	455	1.8	66	1250

*1 Average values in free air and rated voltage condition.

Outline

Characteristic Curves

40deg.C 70,000 Hours *Failure Rate 10% (L10 Life)
Impeller: Plastic
Bearing: Ball Bearings
Lead Wire: UL1430 AWG18 +: Red−: Black
Speed Control: Yellow
Speed Signal: White
* IP compatible type is available for this item.
Associated Data
- PDF product catalog