Temperature sensor relay box MIS-304-T

A specialized digital conversion module of 8-channels (32 channels at the maximum) inputs that measures the mold cavity pressure of the injection molding machine.The pressure / temperature value is watched on the condition set beforehand, and the result is output as an alarm signal. Forward the pressure / temperature value waveform converted into the analog voltage to the molding machine.

【Features】
・Despite being key parameters affecting molding quality, the cavity pressure and cavity temperature waveforms were previously regarded as black box quantities. The Simultaneous Mold Cavity Pressure and Temperature Measurement System allows easy, cost-effective measurement, control, and recording of the cavity pressure and temperature waveforms.
・Measures mold cavity pressure and temperature simultaneously.
・4 channels each for temperature and pressure can be combined as desired and expanded to 8, 16, 24, or 32 channels.
・Defect assessment output provided for each channel (each cavity).
・Data can be saved to a USB flash drive or output to a network device.

Features

・This unit is used when wiring the temperature sensor embedded in the mold to the Integrated MoldSensing System: Amplifier MIS-202-PT/PP.
・The input from four channels of temperature sensors can be measured simultaneously.
・Specialized cable FA409-549-*M as an option is required to connect it with MIS-202-PT.
・CE mark applicable products.

scroll

Specification name	Specification contents
Connectable sensor	4 points of temperature sensors
Operating temp. range	0 ℃ ~ 70 ℃(0 ℃ ~ 100 ℃ When magnet is not used.)
Operating humidity range	85 %RH or less (Non Condensing)
Stored temp. range	-10 ℃ ~ 70 ℃ ( -10 ℃ ~ 100 ℃ when magnet is not used.)
Vibration resistance	10 Hz to 55 Hz double amplitude 1.5 mm, 2 hours for each direction of X, Y or Z.
Outline dimensions (W×H×D)	111.6 mm × 40 mm × 40.4 mm (Excludes protruding parts.)
Weight	Approx. 220 g (Including magnet.)
Mounting method	Mounted with the magnet on a metalic face or with the screw.
Accessories	Instruction manual